Selects the use of the installed side paper deck.

The available options are:

Not Installed

The additional paper source is not installed.

Installed

When this option is selected the side paper deck becomes available as a paper source.


Selects the use of the installed output options.

The available options are:

Not Installed

There are no installed finishing units.

Finisher-F1

When this option is selected stapling becomes available and the upper and lower trays become available as output bins.

Saddle Finisher-F1

When this option is selected saddle stitch and stapling become available and the upper and lower trays become available as output bins.

Shift Tray

When this option is selected the shift tray is enabled and automatically used.


Selects the use of the Puncher Unit.

The available options are:

Not Installed

Select Not Installed if the puncher unit is not installed.

Installed

When this option is selected hole punch becomes available.


Selects the type of finishing for a print job.

The available options are:

None

Additional finishing is not performed.

Staple

Each document within a print job will be stapled.

Hole Punch

Each document within a print job will be hole punched.


Selects the staple position for each document.

The available options are:

Upper Left (Single)

Positions a staple on the upper left of each document.

Lower Left (Single)

Positions a staple on the upper left of each document.

Upper Right (Single)

Positions a staple on the upper left of each document.

Lower Right (Single)

Positions a staple on the upper left of each document.

NOTE:The staple position is set in relation to the printer’s output orientation,not the page orientation.


Selects the hole punch position for each document.

The available options are:

Left

Positions the hole punch on the left edge of each document.

Right

Positions the hole punch on the right edge of each document.

Top

Positions the hole punch on the top edge of each document.

Bottom

Positions the hole punch on the bottom edge of each document.

NOTE:The hole punch position is set in relation to the printer’s output orientation,not the page orientation.


Selects the use of saddle stitching for each document.

The available options are:

Off

Each document is printed without the saddle stitch option.

On

Each document will be folded in half and double stapled along the fold.Stapling will not occur if the document consists of one page.


Selects the output bin for each document.

The available options are:

Printer Default

Each document is output to the default tray.

Upper Tray

Each document is output to the upper tray.Available when the Finisher-F1 or the Saddle Finisher-F2 is installed.

Upper Tray

Each document is output to the lower tray.Available when the Finisher-F1 or the Saddle Finisher-F2 is installed.